FL spiral classifier
[Catalog:Classifying equipment] [Date:2017-11-7 12:08:25] [Hits:] [Return]
Features
In order to match the cylinder feeder of ball mill, a sand scraper is added, which makes the ore pulp flow from the side to the cylinder feeder of ball mill.
Some models of classifiers adopts rolling bearing instead of the original bearing, which reduces the frictional resistance, and avoids frequent replacement and maintenance of the bearings. The space required for installation and maintenance is reduced by adopting ZQ reducer.
The lubrication parts are improved, and grease pumps are arranged for large-size products, making the lubrication more reliable.
- Notes for Selection
While placing your order, please specify the model, quantity, and spiral direction of the classifier as well.
For the classifier matching relevant ball mill, we can design as per the customer's requirements, and make lengthened type (lengthening the water tank, lengthening the precipitation zone). The customer is required to specify the length to be added.
Several revolutions of the classifier are available. If there is no special requirement, we will make the classifier according to normal rotary speed (the underlined bold figure in the table).
In order to match the cylinder feeder of ball mill, a sand scraper is added, which makes the ore pulp flow from the side to the cylinder feeder of ball mill.
Some models of classifiers adopts rolling bearing instead of the original bearing, which reduces the frictional resistance, and avoids frequent replacement and maintenance of the bearings. The space required for installation and maintenance is reduced by adopting ZQ reducer.
The lubrication parts are improved, and grease pumps are arranged for large-size products, making the lubrication more reliable.
- Notes for Selection
While placing your order, please specify the model, quantity, and spiral direction of the classifier as well.
For the classifier matching relevant ball mill, we can design as per the customer's requirements, and make lengthened type (lengthening the water tank, lengthening the precipitation zone). The customer is required to specify the length to be added.
Several revolutions of the classifier are available. If there is no special requirement, we will make the classifier according to normal rotary speed (the underlined bold figure in the table).
Type | Model | Specifications | Spiraldia(mm) | Spiral speed(r/min) | Water | dip (°) | Worker | Driving Motor | Lift Motor | Weight (kg) | ||||
L (mm) | W (mm) | overflowing quantity |
returning quantity |
Model | Power(kw) | Model | Power(kw) | |||||||
high weir single screw | FLG-5 | φ500 | 500 | 10.5 | 4500 | 555 | 14°~18°30′ | 32 | 143~261 | Y90L-6 | 1.1 | manual | 1600 | |
FLG-7 | φ750 | 750 | 6.6 | 5500 | 830 | 14°~18°30′ | 65 | 256~564 | Y132S-6 | 3 | manual | 2900 | ||
FLG-10 | φ1000 | 1000 | 66 | 6500 | 1112 | 14°~18°30′ | 85 | 473~1026 | Y132M2-6 | 5.5 | manual | 4400 | ||
FLG-12 | φ1200 | 1200 | 6 | 6500 | 1372 | 14°~18°30′ | 155 | 1170~1600 | Y132M2-6 | 5.5 | Y90L-4 | 1.5 | 8800 | |
FLG-15 | φ1500 | 1500 | 2.5,4.6 | 8265 | 1664 | 14°~18°30′ | 235 | 1140~2740 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 11680 | |
FJG-20 | φ2000 | 2000 | 3.6,5.5 | 8400 | 2200 | 14°~18°30′ | 400 | 3890~5940 | Y160L-6/4 | 11/15 | Y100L2-4 | 3 | 20450 | |
FLG-24 | φ2400 | 2400 | 3.6 | 9130 | 2600 | 14°~18°30′ | 580 | 6800 | Y200L1-6 | 8.5 | Y100L2-4 | 3 | 25650 | |
FLG-30 | φ3000 | 3000 | 3.2 | 12500 | 3200 | 14°~18°30′ | 890 | 11650 | Y200L2-6 | 22 | Y113M-4 | 4 | 37000 | |
high weir double screw | 2FLG-12 | φ1200 | 1200 | 6 | 6500 | 2600 | 14°~18°30′ | 310 | 2340~3200 | Y132M2-6 | 5.5×2 | Y90L-4 | 1.5×2 | 15840 |
2FLG-15 | φ1500 | 1500 | 2.5,4.6 | 8250 | 3200 | 14°~18°30′ | 470 | 2280~5480 | Y160M-6 | 7.5×2 | Y100L-4 | 2.2×2 | 22100 | |
2FLG-20 | φ2000 | 2000 | 3.6,5.5 | 8400 | 4280 | 14°~18°30′ | 800 | 7780~11880 | Y160L-6/4 | 11×2 15×2 | Y100L2-4 | 3×2 | 36400 | |
2FLG-24 | φ2400 | 2400 | 3.67 | 9130 | 5100 | 14°~18°30′ | 1160 | 13600 | Y200L1-6 | 2×18.5 | Y100L2-4 | 3×2 | 45874 | |
2FLG-30 | φ300 | 3000 | 3.2 | 12500 | 6300 | 14°~18°30′ | 1785 | 23300 | Y200L2-6 | 2×22 | Y112M-4 | 4×2 | 73030 | |
immerged single screw |
FLC-10 | φ1000 | 1000 | 5 | 8400 | 1112 | 14°~18°30′ | 75 | 473~1026 | Y132M2-6 | 5.5 | 手动 | ? | 6000 |
FLC-12 | φ1200 | 1200 | 5,6.7 | 8400 | 1372 | 14°~18°30′ | 120 | 1170~1630 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 11020 | |
FLC-15 | φ1500 | 1500 | 2.5,4.6 | 10500 | 1664 | 14°~18°30′ | 185 | 1830~2740 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 15340 | |
FLC-20 | φ2000 | 2000 | 3.6,5.5 | 12900 | 2200 | 14°~18°30′ | 320 | 3290~5940 | Y160L-6/4 | 11/15 | Y100L2-4 | 3 | 29060 | |
FLC-24 | φ2400 | 2400 | 3.6 | 14130 | 2600 | 14°~18°30′ | 455 | 6800 | Y180M-4 | 18.5 | Y112M-4 | 4 | 37267 | |
FLC-30 | φ3000 | 3000 | 3.2 | 14300 | 3200 | 14°~18°30′ | 705 | 11650 | Y200L-4 | 30 | Y112M-4 | 4 | 43500 | |
merged double screw |
2FLC-12 | φ1200 | 1200 | 6 | 8400 | 2600 | 14°~18°30′ | 240 | 2340~3260 | Y160M-6 | 7.5×2 | Y90L-4 | 1.5×2 | 19610 |
2FLC-15 | φ1500 | 1500 | 2.5,4.6 | 10500 | 3200 | 14°~18°30′ | 370 | 2280~5480 | Y160M-6 | 7.5×2 | Y100L2-4 | 2.2×2 | 27450 | |
2FLC-20 | φ2000 | 2000 | 3.6,5.5 | 12900 | 4280 | 14°~18°30′ | 640 | 7780~11880 | Y160L-6/4 | 11×2 15×2 | Y100L2-4 | 3×2 | 50000 | |
2FLC-24 | φ2400 | 2400 | 3.6 | 14100 | 5100 | 14°~18°30′ | 910 | 13608 | ZXY200L1-6 | 2×18.5 | Y112M-4 | 4×2 | 65283 | |
2FLC-30 | φ3000 | 3000 | 3.2 | 14300 | 6300 | 14°~18°30′ | 1410 | 23300 | ZXY200L2-6 | 2×22 | Y112M-4 | 4×2 | 84870 |