YA Series Circular Vibration Screen for performance
Features
In fact YA Series Vibrating Screen belong to self-centering vibrating screen， Adopted the international advanced environmental Ring-Grooved rivet、 Frame-type screen box frame structure， eccentric shaft plus eccentric block vibrator， High Gear Transmission system、 Low stress damping springs and super heavy large clearance bearings and thin oil lubrication and other advanced techniques and technologies、 possess of screen frame structure with high strength、 large clearance bearing operating temperature is low、 running noise, long life, safe production reliable and easy to maintain.
- Selection illustration
When ordering, except type、 number， Must indicate the mesh size, mesh form(Woven mesh or perforated metal sieve)
The motor can be installed on the left or right, if have installation requirements please indicate. Otherwise, supply the equipment according to the provided installation drawings.
If the user has other special requirements, our factory can do non-standard product design and manufacturing for users.
| Model |
Screen surface
|
Feed particle |
Capacity（t/h） |
Frequence |
Amplitude |
Motor | Dimension (LXWXH）/mm |
total |
Every protection work load |
maximum dynamic load |
||||||||
|
curren
|
original use
|
Deck |
area |
Angle
|
Holesize /mm |
structure
|
Model |
Power/KW |
The feeding end |
exhaust end |
The feeding end |
exhaust end |
||||||
|
YA1236 |
T1412 |
1 |
4.3 |
20° |
6~50 |
knit |
≤200 |
80-240 |
845 |
9.5 |
Y160M-4 |
11 |
3757x2364x2456 |
4905 |
±802 |
±802 |
±4008 |
±4008 |
|
2YA1236 |
2T1412 |
2 |
43 |
20° |
6~50 |
weaving |
<200 |
80-240 |
845 |
9.5 |
Y160M-4 |
11 |
3757 x 2364 x 2456 |
5311 |
土 802 |
土 802 |
±4008 |
士 4008 |
|
YA1530 |
T610 |
1 |
4.5 |
20° |
6-50 |
knit |
≤200 |
80-240 |
845 |
9.5 |
Y160M-4 |
11 |
3184x2670x2280 |
4675 |
±843 |
±843 |
±4214 |
±4214 |
|
YA1536 |
T612 |
1 |
5.4 |
20° |
6-50 |
knit |
≤200 |
100- 350 |
845 |
9.5 |
Y160M4 |
11 |
3757x2670x2419 |
5137 |
±843 |
±843 |
±4165 |
±4165 |
|
2YA1536 |
2T612 |
2 |
5.4 |
20° |
6-50 |
weaving |
≤400 |
100-350 |
845 |
9.5 |
Y160L-4 |
15 |
3757x3715x2437 |
5624 |
±802 |
±802 |
±4008 |
±4008 |
| YAH1536 | T1S512 | 1 | 5.4 | 20° | 30-150 |
punching
|
≤400 | 160-650 | 755 | 9.5 | Y160M4 | 11 | 3757x2670x2437 | 5621 | ±931 | ±931 | ±4655 | ±4655 |
| 2YAH1536 | ZTS112 | 2 | 5.4 | 20° | 30 - 200 6-50 |
On the punching The weaving |
≤400 | 160-650 | 755 | 11 | Y160L4 | 15 | 3757x2715x2437 | 6045 | ±931 | ±931 | ±4655 | ±4655 |
| YA1542 | 71514 | 1 | 6.5 | 20° | 6~50 | knit | ≤200 | 110-385 | 846 | 9.5 | Y160M^ | 11 | 4331x2670 x 2655 | 5515 | ±802 | ±802 | ±4008 | ±4008 |
| 2YA1542 | mu | 2 | 6.5 | 20° | 30-150 | knit | ≤200 | 110-385 | 846 | 9.5 | Y160L-4 | 15 | 4331x2715x2675 | 6098 | ±802 | ±802 | ±4008 | ±4008 |
| YA1548 | Ti516 | 1 | 7.2 | 20° | 6-50 | knit | ≤200 | 120-420 | 845 | 9.5 | Y160L4 | 15 | 4904 x 2715 x 2854 | 5918 | ±847 | ±847 | ±4234 | ±4234 |
| 2YA1548 | ?Ti516 | 2 | 7.2 | 20° | 6~50 | weaving | ≤200 | 120 - 420 | 845 | 9.5 | Y160L4 | 15 | 4904x2715x2861 | 6321 | ±847 | ±847 | ±4234 | ±4234 |
| YAH1548 | TiS516 | 1 | 7.2 | 20° | 30-150 |
punching
|
≤400 | 200-780 | 755 | 11 | Y160L4 | 15 | 4904x2715x2&43 | 6842 | ±1392 | ±1392 | ±_ | ±6958 |
| YA1548 | 2T1S616 | 2 | 7.2 | 20° | 30-150 |
On the punching The weaving |
≤400 | 200 -780 | 755 | 11 | Y160L4 | 15 | 4904 x 2715 x 2943 | 7404 | ±1392 | ±1392 | ±6958 | ±6958 |
| YA1836 | T612 | 1 | 6.5 | 20° | 30-150 | knit | ≤200 | 140-220 | 845 | 9.5 | Y160IVM | 11 | 3757x2975x2419 | 5205 | ±892 | ±892 | ±4460 | ±4460 |
| 2YA1836 | ?Ti612 | 2 | 6.5 | 20° | 30-150 | weaving | ≤200 | 140- 220 | 846 | 9.5 | Y160L4 | 15 | 3757x2975x2419 | 5946 | ±847 | ±847 | ±4234 | ±4234 |
| YAH1836 | TiS612 | 1 | 6.5 | 20° | 30-150 | 冲孔 | ≤400 | 220-910 | 755 | 11 | Y160M-4 | 11 | 3757x2975x2437 | 5900 | ±980 | ±980 | ±4900 | ±4900 |
| YA1836 | 2T1S612 | 2 | 6.5 | 20° | 30 - 200 6-50 |
On the punching The weaving |
≤400 | 220 -900 | 755 | 11 | Y160L4 | 15 | 3757x3020x2437 | 6353 | ±980 | ±980 | ±4900 | ±4900 |
| YA1842 | Ti614 | 1 | 7.6 | 20° | 6-150 | knit | ≤200 | 140-490 | 846 | 9.5 | Y160L-4 | 15 | 4331x3020 x 2675 | 5829 | ±847 | ±847 | ±4234 | ±4234 |
| 2YA1842 | ?H614 | 2 | 7.6 | 20° | 6-150 | knit | ≤200 | 140-490 | 845 | 9.5 | Y160L4 | 15 | 4331x3020 x 2675 | 6437 | ±847 | ±847 | ±4234 | ±4234 |
| YAH1842 | TiS614 | 1 | 7.6 | 20° | 30-150 |
punching
|
≤400 | 450 - 800 | 755 | 11 | Y160L4 | 15 | 4331x3020x2700 | 6352 | ±928 | ±928 | ±4640 | 4640 |
| YA1842 | 2TS614 | 2 | 7.6 | 20° | 30-150 |
On the punching The weaving |
≤400 | 450-800 | 755 | 11 | Y160L-4 | 15 | 4331x3020x2700 | 7037 | ±928 | ±928 | ±4640 | 4640 |
| YA1848 | Tl616 | 1 | 8.6 | 20° | 6~50 | knit | ≤200 | 150-525 | 845 | 9.5 | Y160L-4 | 15 | 4904 x 3020 x 2861 | 6289 | ±847 | ±847 | ±4234 | ±4234 |
| YA1848 | 2TI616 | 2 | 8.6 | 20° | 6~50 | weaving | ≤200 | 150-525 | 846 | 9.5 | Y1G0L-4 | 15 | 4904x3023x2861 | 6624 | ±847 | ±847 | ±4234 | ±4234 |
| YAH1848 | T1S6I6 | 1 | 8.6 | 20。 | 30-150 | 冲孔 | 0-150 | 250-1000 | 755 | 11 | Y160L-4 | 15 | 4904 x 3023 x 2943 | 7122 | ±1392 | ±1392 | ±6958 | ±_ |
| YAH1848 | 2T1S616 | 2 | 8.6 | 20° | 30-150 | weaving | ≤400 | 250 -000 | 755 | 11 | Y160L-4 | 15 | 4904 x 3023 x 2943 | 7740 | ±1392 | ±1392 | ±6958 | ±_ |
| YA2148 | 71716 | 1 | 10 | 20。 | 6-50 | knit | ≤210 | 180-630 | 748 | 9.5 | Y180M4 | 18.5 | 4945x3423x3515 | 9033 | ±1675 | ±1675 | ±8379 | ±8379 |
| YA2148 | 2T1716 | 2 | 10 | 20° | 6-50 | weaving | ≤210 | 180-630 | 748 | 9.5 | Y180L-4 | 22 | 4945 x 3463 x 3515 | 10532 | ±1675 | ±1675 | ±8379 | ±8379 |
| YAH2148 | T1S716 | 1 | 10 | 20° | 13-200 | 冲孔 | ≤400 | 270-1200 | 708 | 11 | Y180M^ | 18.5 | 4945 x 3423 x 3501 | 10430 | ±2889 | ±2889 | ±14445 | ±14445 |
| YAH2148 | 2T1S716 | 2 | 10 | 20° | 30-150 | weaving | ≤400 | 270-1200 | 708 | 11 | Y180L-4 | 22 | 6092 x 3423 x 3674 | 11190 | ±2889 | ±2889 | ±14445 | ±14445 |
| YA2160 | Ti720 | 1 | 12.6 | 20。 | 3-80 | knit | ≤200 | 230-800 | 748 | 9.5 | Y180M4 | 18.5 | 6092 x 3463 x 3674 | 9926 | ±2495 | ±2495 | ±12475 | ±12475 |
| YA2160 | 2H1720 | 2 | 12.6 | 2CT | 6~50 | weaving | ≤200 | 230 - 800 | 748 | 9.5 | Y180L-4 | 22 | 6116 x 3619 x 3849 | 11249 | ±2495 | ±2495 | ±12475 | ±12475 |
| YAH2160 | TiS720 | 1 | 12.6 | 20° | 30-150 |
punching
|
≤400 | 350-1500 | 708 | 11 | Y200L-4 | 30 | 6116 x 3619 x 3849 | 12490 | ±2889 | ±2889 | ±14445 | ±14445 |
| YAH2160 | 2T1S720 | 2 | 126 | 20° | 30-150 | weaving | ≤400 | 350 -450 | 708 | 11 | Y200L-4 | 30 | 6116 x 3619 x 3849 | 13858 | ±2889 | ±2889 | ±14445 | ±14446 |
| YA2448 | T18I6 | 1 | 11.5 | 20° | 6-50 | knit | ≤200 | 200-700 | 748 | 9.5 | Y180M-4 | 18.5 | 4945 x 3729 x 3473 | 9834 | ±2495 | ±2495 | ±12475 | ±12475 |
| YAH2448 | HS816 | 1 | 11.5 | 20° | 6~50 |
punching
|
≤400 | 310-1300 | 708 | 11 | Y200L-4 | 30 | 4970 x 3925 x 3638 | 11830 | ±2889 | ±2889 | ±14445 | ±14445 |
| YAH2448 | 2T1S816 | 2 | 11.5 | 20。 | 30-150 |
On the punching The weaving |
≤400 | 310-1300 | 708 | 11 | Y200L-4 | 30 | 4970x3925x3638 | 13012 | ±2889 | ±2889 | ±14445 | ±14445 |
| YA2460 | Ti820 | 1 | 14.4 | 20° | 6~50 | knit | ≤200 | 260 -780 | 748 | 9.5 | Y200L-4 | 30 | 6091x3925 x 3850 | 12240 | ±2495 | ±2495 | ±12475 | ±12475 |
| YA2460 | 211820 | 2 | 14.4 | 20° | 6-50 | weaving | ≤200 | 260 -780 | 748 | 9.5 | Y200L-4 | 30 | 6091x3925 x 3850 | 13583 | ±2495 | ±2495 | ±12475 | ±12475 |
| YAH2460 | T1S820 | 1 | 14.4 | 20° | 30-150 |
punching
|
≤400 | 400-1700 | 708 | 11 | Y200L-4 | 30 | 6091x3925 x 3846 | 13096 | ±2889 | ±2889 | ±14445 | ±14445 |
| YAH2460 | 2T1S820 | 2 | 14.4 | 20° | 30-150 |
On the punching The weaving |
≤400 | 400-1700 | 708 | 11 | Y200L-4 | 30 | 6091x3925x3846 | 14455 | ±2889 | ±2889 | ±14445 | ±1444115 |
