lower movable diaphragm jig
Features
This product is lower movable, Rectangular jig. Product features: Jig gear installed in the below of the jigging chamber ,
Storage is conical, Circular rubber membrane connect with jigging chamber . motor and pulley set at one end of the machine, via
eccentric rotation turned to push the diaphragm movement up and down. Jig has no separate diaphragm chamber, so engage small
area. The below conical storage and the diaphragm movement direct the jigging chamber, water velocity distribution is uniform. But
inside the jig the pulse water velocity is weak. It is difficult to relax for the coarse particle, therefore not suitable for dealing with
coarse particle, generally applicable for separation less than 6mm pellets. It is suitable for separation the metal ore, it can be used
rougher flotation or ,it is usual gravity separation equipment
- Notes for Selection
Please specify the model and quantity, as well as the size of screen aperture while placing your order. If there is no special
requirement, we will supply the screen with each aperture of 2mm.
|
Model |
jigging chamber |
Blunt and coefficient of |
diaphragm |
Maximum |
capacity |
water |
||||||
|
|
W*L /hmxmm |
Single-chamber area /m2 |
Number of Rows |
overall |
Overall |
stroke |
frequency |
|||||
|
LTA55/2 |
Rectangle |
500x500 |
0.25 |
1 |
2 |
0.50 |
0.50 |
0~15 |
250、 300 350 |
5 |
1~5 |
4~20 |
|
LTA1010/ |
Rectangle |
1000x1000 |
1.00 |
1 |
2 |
2.00 |
0.50 |
0~15 |
250、 300 350 |
5 |
-25 |
20-60 |
|
Model |
Motor |
mm x mm x mm Dimension(L x W x H) mm x mm x mm |
gross weight(kg) |
|||||||||
|
Model |
power |
rpm (r/min) |
||||||||||
|
LTA55/2 |
Y100L- |
1.5 |
940 |
|
|
|||||||
|
LTA1010/ |
Y132S-6 |
3 |
940 |
2018x1718x1012 |
950 |
|||||||
